Figure 10 E Table Relationships

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

C.8.1 Table EA, Support Equipment. This Table captures a large portion of data which occurs one time per support/training equipment item. This Table is used as the foundation for support/training equipment documentation as a whole. Table keys are Support Equipment (SE) CAGE (SECAGEEA) and SE Reference Number (SEREFNEA). For a given row of information, the following cross-element edits apply to Table EA :

(a)If Adaptor/Interconnection Device Required (AIDRQDEA) is ‘Y’, Tables UI and UJ shall be completed.

(b)SE Operating Dimensions (OPRHGTEA, OPLENGEA, OPWIDTEA) and SE Operating Dimensions Unit Of Measure (LWHOUMEA) shall all be blank or all have entries.

(c)SE Operating Weight (OPRWGTEA) and SE Operating Weight Unit Of Measure (WGTOUMEA) shall either both be blank or both have entries.

(d)SE Storage Dimensions (STOHGTEA, STOLENEA, STOWDTEA) and SE Storage Dimensions Unit Of Measure (LWHSUMEA) shall all be blank or all have entries.

(e)SE Storage Weight (STOWGTEA) and SE Storage Weight Unit Of Measure (WGTSUMEA) shall either both be blank or both have entries.

(f)SE Transportation Dimensions (SESHPHEA, SESHPLEA, SESHPWEA) and SE Transportation Dimensions Unit Of Measure (UMSHIPEA) shall all be blank or all have entries.

(g)SE Transportation Weight (SESHWTEA) and SE Transportation Weight Unit Of Measure (UMSEWTEA) shall either both be blank or both have entries.

(h)Design Data Price (DSNPRCEA) and Design Data Price Currency Code (DDPCCDEA) shall either both be blank or both have entries.

(i)Extended Unit Price (EXUNPREA) and Extended Unit Price Currency Code (EUPCCDEA) shall either both be blank or both have entries.

(j)Hardware Development Price (HDWRPREA) and Hardware Development Price Currency Code (HDPCCDEA) shall either both be blank or both have entries.

(k)ILS Price (ILSPRCEA) and ILS Price Currency Code (ILSPCCEA) shall either both be blank or both have entries.

(l)Operating and Support Cost (OSCOSTEA) and Operating and Support Cost Currency Code (OSCCCDEA) shall either both be blank or both have entries.

(m)Pass Through Price (PASTHREA) and Pass Through Price Currency Code (PTPCCDEA) shall either both be blank or both have entries.

C-56

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

(n) SE Recurring Cost (RCURCSEA) and SE Recurring Cost Currency Code (RECCCDEA) shall either both be blank or both have entries.

NOTE: When entering Support Equipment Category (SEQCATEA), attention should be given to Support Equipment Item Category Code (SEICCDEA) so that the two data elements are not contradictory.

C-57

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

C.8.2 Table EB, Support Equipment Allocation Data. This Table allows documenting of specific information relating allocation documents to discrete facility types and maintenance levels. Ten allowance ranges can be documented to describe the quantity of SE or Automatic Test Equipment (ATE) items necessary to support the number of end articles related to each discrete range of supported end item density. DED 015 dictates the value of each range for the number of pieces of: (a) end items; (b) ATE items; or, (c) depot overhaul requirements

C-58

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

that the entered quantity of SE can support. Table keys are SE CAGE (SECAGEEA), SE Reference Number (SEREFNEA) and Allowance Document Number (ALDCNMEB).

C.8.3 Table EC, Support Equipment Parameters. This Table allows documenting the discrete parameters which can be measured, generated etc., by the support/training equipment. The capabilities documented here are the basis for determining suitability of an SE item when compared to the unit under test (UUT) parameters. This Table can be used to document parameters for either CMRS Category II or Category III SE. Table keys are SE CAGE (SECAGEEA), SE Reference Number (SEREFNEA) and Parameter Group Code (PARGPCEC).

C.8.4 Table ED, Support Equipment Authorization. This Table allows documenting specific organizations and quantities to which the SE item is to be authorized, as well as the location of each organization. Table keys are SE CAGE (SECAGEEA), SE Reference Number (SEREFNEA) and Organization Name/Location (ACTNAMED).

C-59

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

C.8.5 Table EE, Support Equipment Narrative. This Table is used to document different types of narrative text for SE. Each type of narrative is dependent upon the SE CAGE (SECAGEEA) and SE Reference Number (SEREFNEA) as migrating keys from Table EA. Additional keys include SE Narrative Text Sequencing Code (TEXSEQEE) and SE Narrative Code (SENARCEE). The SE Narrative Codes (DED 414) correspond to the different types of narratives. The following list gives each of these codes, related narrative title, and (DED) number to refer to for an understanding of the information that needs to be input:

C.8.6 Table EF, Support Equipment Recommendation Data. This Table allows documenting SERD specific information such as, submittal and disposition dates. Table keys are SE CAGE (SECAGEEA), SE Reference Number (SEREFNEA), SERD Number (SERDNOEF), and SERD Revision (SRDREVEF).

C-60

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

C.8.7 Table EG, Support Equipment Recommendation Data Revision Remarks. This Table allows documenting, for a SERD revision, the revision letter, revision date, action date, and revision remarks, which summarize the reason for revision, within a narrative field. For SERDs that have been revised more than once, this block shall include the revision data and remarks of all previous revisions, and therefore, serve as a history for the SERD. Table keys are SE CAGE (SECAGEEA), SE Reference Number (SEREFNEA), SERD Number (SERDNOEF), and Text Sequencing Code (TEXSEQEG).

C.8.8 Table EH, Alternative NATO Stock Number. This Table allows documenting alternative NSNs of items which may be substituted for the subject Support/Training Equipment item. This information is used specifically by the SERD Report (LSA-070). Table keys are SE CAGE (SECAGEEA), SE Reference Number (SEREFNEA), SERD Number (SERDNOEF), SERD Revision (SRDREVEF), Alternate NSN NATO Supply Classification (ALTFSCEH) and Alternate NSN National Item Identification Code (ALTNIIEH).

C.8.9 Table EI, TMDE Input Power Source. This Table is utilized to document power requirements to operate the support/training equipment under analysis. Included are voltage levels, frequency ranges, power requirements, phase type, and alternating or direct current data. Table keys are SE CAGE (SECAGEEA), SE Reference Number (SEREFNEA) and Source Option Number (IPSOPNEI).

NOTE 1: The Source Option Number should be assigned sequentially from 1 to 99 (manually or automatically) for each unique set of power requirements for a subject piece of SE.

NOTE 2: A unique set of power requirements may have only one value different from another set of power requirements.

C-61

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

C.8.10 Table EJ, Support Equipment Design Data. This Table allows documenting detailed cost, requirement, and recommendation information for the various design data elements (see DED 079). Table keys are SE CAGE (SECAGEEA), SE Reference Number (SEREFNEA) and Design Data Category Code (DSNDATEJ). For a given row of information, the following cross-element edit applies to Table EJ :

(a) Design Data Category Code Estimated Price (ESTPRCEJ) and DDCC Estimated Price Cost Currency Code (DEPCCDEJ) shall either both be blank, or both have entries.

C.8.11 Table EK, Support Equipment Supersedure Data. This Table provides information about the item replacing, or being replaced, by the SE item under analysis. This information is normally regulated by SERD number, but may be governed by reference number and CAGE. Table keys are SE CAGE (SECAGEEA), SE Reference Number (SEREFNEA) as well as Supersedure CAGE Code (SPRCAGEK) and Supersedure Reference Number (SPRREFEK), which migrate from Table HA and are given the role name ‘Supersedure’. For a given row of information, the following cross-element edit applies to Table EK :

(a) Principal Features List Code (PFLCODEK), if required, shall either be set to ‘MAJICYP’ or ‘MAJICYF’ (refer to Principal Features List data element definition).

NOTE: It is mandatory that the Supersedure Type element (SUTYPEEK) be completed.

C-62

C.8.12 Table EL, Support Equipment Integrated Logistic Support Requirement Category Code. This Table allows documenting the element(s) of ILS which are required or recommended to be addressed for the SE item. Also included are the estimated price, whether government required or contractor recommended, and a scope (normally a data item description) for each ILS element documented. Table keys are SE CAGE (SECAGEEA), SE Reference Number (SEREFNEA) and SE ILS Requirement Category Code (IRCCODEL). For a given row of information, the following cross-element edit applies to Table EL :

(a) Integrated Logistic Support Requirement Estimated Price (ESTPRCEL) and IRCC Estimated Price Cost Currency Code (IEPCCDEL) shall either both be blank, or both have entries.

C.8.13 Table EM, System Equipment. This Table allows documenting items which are components of the system/equipment and are necessary to be used in conjunction with the SE item to perform its intended function. For example, a wiring harness with the same part number as the one used on the system/equipment might be required at test bench in order to fault isolate a line replaceable unit (LRU). This wiring harness would be considered a required piece of system equipment. Table Keys include System CAGE code (SCAGECEM) and System Reference Number (SREFNOEM) (these migrate from Table HA, but are given ‘System’ role name), and SE CAGE (SECAGEEA) and SE Reference Number (SEREFNEA) (migrate from Table EA).

C-63

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

C-64

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

C.9 Unit Under Test Requirements and Description

Data Tables beginning with ‘U’ in the first position of the Table Code are structured to identify the Unit Under Test (UUT) and those hardware and software elements required to test the UUT with off-line support/test equipment. The unique combination of these elements required for a specific UUT and support/test equipment configuration is a Test Programme Set (TPS). In addition to defining the TPS elements, this information provides the configuration identification of the UUT (ie, the UUT and the support/test equipment to be used in the test). This information is established for each UUT which has a requirement to be tested by the support/test equipment documented. Additionally, Calibration and Measurement Requirement Summary (CMRS) information is documented in these Tables. Figure 11 depicts the relational hierarchy of these Tables/entities.

C-65