Курсовая_Хандецкий_КИ / Отчет

Настройки для локальных сетей.
.
.
Router0>en
Router0#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router0(config)#ip dhcp pool LAN1
Router0(dhcp-config)#network 192.168.0.0 255.255.255.0
Router0(dhcp-config)#default-router 192.168.0.1
Router0(dhcp-config)#ex
Router0(config)#int fa0/0
Router0(config-if)#ip addr 192.168.0.1 255.255.255.0
Router0(config-if)#no shut
.
.
.
Router>en
Router#
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname Router6
Router6(config)#ip dhcp pool LAN2
Router6(dhcp-config)#net 172.16.0.0 255.255.0.0
Router6(dhcp-config)#def 172.16.0.1
Router6(dhcp-config)#ex
Router6(config)#int fa0/0
Router6(config-if)#ip addr 172.16.0.1 255.255.0.0
Router6(config-if)#no shut
------------------------------------------------------------------------------
------------------------------------------------------------------------------
------------------------------------------------------------------------------
.
.
.
Настройки для следующих интерфейсов.
.
.
.
Router0>en
Router0#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router0(config)#int fa0/1
Router0(config-if)#ip addr 9.1.1.1 255.255.255.252
Router0(config-if)#no shut
.
.
Router1>en
Router1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router1(config)#int fa0/0
Router1(config-if)#ip addr 9.1.1.2 255.255.255.252
Router1(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Router1(config-if)#ex
Router1(config)#int fa0/1
Router1(config-if)#ip addr 9.1.1.5 255.255.255.252
Router1(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

Router1(config-if)#ex
Router1(config)#int fa1/0
Router1(config-if)#ip addr 9.1.1.21 255.255.255.252
Router1(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
.
.
Router2(config)#
Router2(config)#int fa0/0
Router2(config-if)#ip addr 9.1.1.2 255.255.255.252
Router2(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Router2(config-if)#ex
Router2(config)#int fa0/1
Router2(config-if)#ip addr 9.1.1.5 255.255.255.252
Router2(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

Router2(config-if)#ex
Router2(config)#int fa1/0
Router2(config-if)#ip addr 9.1.1.21 255.255.255.252
Router2(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up

Router2(config-if)#ex
.
.
следующие маршрутизаторы настраиваем аналогично...


--------------------------------------------------------------------------
.
.
.
Router0>en
Router0#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router0(config)#ip nat ins sour stat 192.168.0.1 9.1.1.1
Router0(config)#int fa0/0
Router0(config-if)#ip nat ins
Router0(config-if)#
Router0(config)#int fa 0/1
Router0(config-if)#ip nat out
Router0(config-if)#ex
.
.
.
.
Router6(config)#ip nat ins sou stat 172.16.0.1 9.1.1.30
Router6(config)#int fa0/0
Router6(config-if)#ip nat ins
Router6(config-if)#ex
Router6(config)#int fa0/1
Router6(config-if)#ip nat out
Router6(config-if)#ex
Router6(config)#
--------------------------------------------------------------------


******RIP*******


Router0(config)#rout rip
Router0(config-router)#ver 2
Router0(config-router)#net 192.168.0.0
Router0(config-router)#net 9.1.1.0
Router0(config-router)#
.
.
Router1>
Router1>en
Router1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router1(config)#rout rip
Router1(config-router)#ver 2
Router1(config-router)#net 9.1.1.0
Router1(config-router)#net 9.1.1.4
Router1(config-router)#net 9.1.1.20
Router1(config-router)#
.
.
Router2#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router2(config)#rout rip
Router2(config-router)#ver 2
Router2(config-router)#net 9.1.1.4
Router2(config-router)#net 9.1.1.16
Router2(config-router)#net 9.1.1.8
.
.
.
Router3(config)#router rip
Router3(config-router)#ver 2
Router3(config-router)#net 9.1.1.8
Router3(config-router)#net 9.1.1.12
.
.
.
и.т.д...

Router5#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router5(config)#rout rip
Router5(config-router)#ver 2
Router5(config-router)#net 9.1.1.12
Router5(config-router)#net 9.1.1.16
Router5(config-router)#net 9.1.1.24
Router5(config-router)#net 9.1.1.28
Router5(config-router)#ex


Router5>
Router5>en
Router5#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router5(config)#rout rip
Router5(config-router)#ver 2
Router5(config-router)#net 9.1.1.12
Router5(config-router)#net 9.1.1.16
Router5(config-router)#net 9.1.1.24
Router5(config-router)#net 9.1.1.28

-------------------------OSPF----------------------------------


Сначала вводиться команда и номер обозначающий ИД процеса маршрутизации.
Router1(config)#router ospf 101

Далее вводиться адрес сети (также может быть введен адрес интерфейса, обратная маска, которая
показывает сколько бит адреса могут меняться и ИД области)
Router1(config-router)#network 9.1.1.0 0.0.0.3 are
Router1(config-router)#network 9.1.1.0 0.0.0.3 area 0
Router1(config-router)#network 9.1.1.4 0.0.0.3 area 0
Router1(config-router)#network 9.1.1.20 0.0.0.3 area 0


Router0(config)#rout ospf 101
Router0(config-router)#net 9.1.1.0 0.0.0.3 area 0
00:07:47: %OSPF-5-ADJCHG: Process 101, Nbr 9.1.1.21 on FastEthernet0/1 from LOADING to FULL, Loading Done
Router0(config-router)#network 192.168.0.0 0.0.0.255 area 1


Router4(config)#rout ospf 101
Router4(config-router)#net 9.1.1.20 0.0.0.3 area 0
Router4(config-router)#net 9.1.1.24 0.0.0.3 area 0
00:18:54: %OSPF-5-ADJCHG: Process 101, Nbr 9.1.1.21 on FastEthernet0/0 from LOADING to FULL, Loading Done


Router2(config)#rout ospf 101
Router2(config-router)#net 9.1.1.4 0.0.0.3 area 0
Router2(config-router)#net 9.1.1.16 0.0.0.3 area 0
Router2(config-router)#net 9.1.1.8 0.0.0.3 area 0


Router3(config)#router ospf 101
Router3(config-router)#net 9.1.1.8 0.0.0.3 area 0
Router3(config-router)#net 9.1.1.12 0.0.0.3 area 0
Router3(config-router)#