Philips Semiconductors Product specification
Rectifier diodes |
|
|
|
|
|
|
|
|
PBYR30100PT series |
|
|||||||||||
schottky barrier |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
GENERAL DESCRIPTION |
QUICK REFERENCE DATA |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
Dual, low leakage, platinum barrier |
|
SYMBOL |
|
PARAMETER |
|
|
|
MAX. |
|
|
MAX. |
|
MAX. |
|
UNIT |
|
|||||
schottky rectifier diodes in a plastic |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PBYR30- |
|
|
|
60PT |
|
|
80PT |
|
100PT |
|
|
|
|
||||
envelope featuring low forward |
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
voltage drop and absence of stored |
|
VRRM |
|
Repetitive peak reverse |
|
60 |
|
|
|
80 |
|
|
100 |
|
|
V |
|
||||
charge. These devices can withstand |
|
|
|
|
voltage |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
reverse voltage transients and have |
|
VF |
|
Forward voltage |
|
0.7 |
|
|
|
0.7 |
|
|
0.7 |
|
|
V |
|
||||
guaranteed reverse surge capability. |
|
IO(AV) |
|
Output current (both |
|
30 |
|
|
|
30 |
|
|
30 |
|
|
A |
|
||||
The devices are intended for use in |
|
|
|
|
diodes conducting) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
switched mode power supplies and |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
high frequency circuits in general |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
where low conduction and zero |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
switching losses are important. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PINNING - SOT93 |
PIN CONFIGURATION |
SYMBOL |
|
|
|
|
|
|
|
|
|
||||||||||
PIN DESCRIPTION
1Anode 1 (a)
2Cathode (k)
3Anode 2 (a)
tab Cathode (k)
tab |
|
|
|
|
|
a1 |
a2 |
1 |
2 |
3 |
k |
|
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134).
SYMBOL |
PARAMETER |
CONDITIONS |
MIN. |
|
MAX. |
|
UNIT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-60 |
-80 |
-100 |
|
VRRM |
Repetitive peak reverse voltage |
|
|
- |
60 |
80 |
100 |
V |
VRWM |
Crest working reverse voltage |
Tmb ≤ 139 ˚C |
- |
60 |
80 |
100 |
V |
|
VR |
Continuous reverse voltage |
- |
60 |
80 |
100 |
V |
||
IO(AV) |
Output current (both diodes |
square wave; δ = 0.5; |
- |
|
30 |
|
A |
|
|
conducting)1 |
T |
≤ 124 ˚C |
|
|
|
|
|
IO(RMS) |
RMS forward current |
mb |
|
- |
|
43 |
|
A |
t = 25 μs; δ = 0.5; |
|
|
||||||
IFRM |
Repetitive peak forward current |
- |
|
30 |
|
A |
||
IFSM |
per diode |
Tmb |
≤ 124 ˚C |
|
|
|
|
|
Non-repetitive peak forward |
t = 10 ms |
- |
|
180 |
|
A |
||
|
current per diode. |
t = 8.3 ms |
- |
|
200 |
|
A |
|
|
|
sinusoidal; Tj = 125 ˚C prior |
|
|
|
|
|
|
|
|
to surge; with reapplied |
|
|
|
|
|
|
I2t |
I2t for fusing |
VRWM(max) |
- |
|
162 |
|
A2s |
|
t = 10 ms |
|
|
||||||
IRRM |
Repetitive peak reverse current |
tp = 2 μs; δ = 0.001 |
- |
|
1 |
|
A |
|
|
per diode. |
tp = 100 μs |
|
|
|
|
|
|
IRSM |
Non-repetitive peak reverse |
- |
|
1 |
|
A |
||
|
current per diode. |
|
|
|
|
|
|
|
Tstg |
Storage temperature |
|
|
-65 |
|
175 |
|
˚C |
Tj |
Operating junction temperature |
|
|
- |
|
150 |
|
˚C |
1 For output currents in excess of 20 A connection should be made to the exposed metal mounting base.
October 1994 |
1 |
Rev 1.100 |
Philips Semiconductors Product Specification
Rectifier Diode |
|
PBYR30100PT series |
|
||||
Schottky Barrier |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
THERMAL RESISTANCES |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SYMBOL |
PARAMETER |
CONDITIONS |
MIN. |
TYP. |
MAX. |
UNIT |
|
|
|
|
|
|
|
|
|
Rth j-mb |
Thermal resistance junction to |
per diode |
- |
- |
1.4 |
K/W |
|
|
mounting base |
both diodes |
- |
- |
1.0 |
K/W |
|
Rth j-a |
Thermal resistance junction to |
in free air. |
- |
45 |
- |
K/W |
|
|
ambient |
|
|
|
|
|
|
STATIC CHARACTERISTICS |
|
|
|
|
|
|
|
Tj = 25 ˚C unless otherwise stated |
|
|
|
|
|
|
|
SYMBOL |
PARAMETER |
CONDITIONS |
MIN. |
TYP. |
MAX. |
UNIT |
|
|
|
|
|
|
|
|
|
VF |
Forward voltage (per diode) |
IF = 15 A; Tj = 125˚C |
- |
0.61 |
0.70 |
V |
|
|
|
IF = 30 A; Tj = 125˚C |
- |
0.74 |
0.85 |
V |
|
|
|
IF = 15 A; Tj = 25˚C |
- |
0.77 |
0.85 |
V |
|
IR |
Reverse current (per diode) |
VR = VRWM; Tj = 25 ˚C |
- |
5.0 |
150 |
μA |
|
|
|
VR = VRWM; Tj = 125 ˚C |
- |
5.0 |
15 |
mA |
|
Cd |
Junction capacitance (per |
f = 1MHz; VR = 5V; Tj = 25 ˚C to |
- |
600 |
- |
pF |
|
|
diode) |
125 ˚C |
|
|
|
|
|
October 1994 |
2 |
Rev 1.100 |
Philips Semiconductors |
Product specification |
|
|
Rectifier diodes |
PBYR30100PT series |
schottky barrier |
|
|
|
20 |
PF / W |
PBYR30100PT |
|
Tmb(max) / C122 |
||
|
|
|||||
|
Vo = 0.550 V |
|
|
|
|
|
|
Rs = 0.010 Ohms |
|
|
|
|
|
|
|
|
|
D = 1.0 |
|
|
15 |
|
0.5 |
|
|
|
129 |
|
|
|
|
|
|
|
10 |
|
0.2 |
|
|
|
136 |
0.1 |
|
|
|
|
||
|
|
|
|
|
|
|
|
|
I |
tp |
D = |
tp |
|
5 |
|
|
|
T |
143 |
|
|
|
|
|
T |
t |
|
|
|
|
|
|
|
|
0 |
|
|
|
|
|
150 |
|
0 |
10 |
|
20 |
|
26 |
|
|
IF(AV) / A |
|
|
|
|
Fig.1. Maximum forward dissipation PF = f(IF(AV)) per diode; square current waveform where
IF(AV) =IF(RMS) x ÖD.
PF / W |
|
PBYR30100 |
Tmb(max) / C |
15 |
|
|
129 |
Vo = 0.550 V |
|
|
|
Rs = 0.010 Ohms |
|
|
|
|
|
|
a = 1.57 |
|
|
|
1.9 |
10 |
|
2.2 |
136 |
|
2.8 |
||
|
|
|
|
|
|
4 |
|
5 |
|
|
143 |
0 |
5 |
10 |
150 |
0 |
15 |
||
|
|
IF(AV) / A |
|
Fig.2. Maximum forward dissipation PF = f(IF(AV)) per diode; sinusoidal current waveform where a = form factor = IF(RMS) / IF(AV).
|
IF / A |
|
PBYR30100PT |
|
100 |
Tj = 25 C |
|
|
|
|
|
|
|
|
80 |
Tj = 125 C |
|
|
|
|
Typ |
Max |
|
|
|
|
|
||
60 |
|
|
|
|
40 |
|
|
|
|
20 |
|
|
|
|
0 |
|
|
|
|
0 |
0.5 |
1 |
1.5 |
2 |
|
|
VF / V |
|
|
Fig.3. Typical and maximum forward characteristic per diode; IF = f(VF); parameter Tj
IR/ mA |
|
|
|
|
|
PBYR30100PT |
|||
100 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Tj/ C = 150 |
|
|
|
||
10 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
125 |
|
|
|
|
1 |
|
|
|
|
100 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
75 |
|
|
|
0.1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
50 |
|
|
|
0.01 |
|
|
|
|
|
|
|
|
|
10 |
20 |
30 |
40 |
50 |
60 |
70 |
80 |
90 |
100 |
|
|
|
|
VR/ V |
|
|
|
|
|
Fig.4. Typical reverse leakage current per diode; IR = f(VR); parameter Tj
Cd/ pF |
|
PBYR30100PT |
10000 |
|
|
1000 |
|
|
100 |
|
|
10 |
|
|
1 |
10 |
100 |
|
VR/ V |
|
Fig.5. Typical junction capacitance per diode; Cd = f(VR); f = 1 MHz; Tj = 25˚C to 125 ˚C.
Zth j-mb (K/W) |
|
|
|
10 |
|
|
|
1 |
|
|
|
0.1 |
PD |
tp |
|
|
|
||
|
|
|
t |
0.01 |
|
|
|
10us |
1ms |
0.1s |
10s |
|
tp / s |
|
|
Fig.6. Transient thermal impedance per diode; Zth j-mb = f(tp).
October 1994 |
3 |
Rev 1.100 |
Philips Semiconductors Product Specification
Rectifier Diode |
PBYR30100PT series |
Schottky Barrier |
|
|
|
MECHANICAL DATA |
|
Dimensions in mm
Net Mass: 5 g
|
15.2 |
|
|
|
max |
|
|
|
14 |
|
|
|
13.6 |
4.6 |
|
2 max |
4.25 |
max |
|
2 |
|||
|
4.15 |
||
|
|
4.4 |
21 max
12.7
max
2.2 max |
|
|
|
|
dimensions within |
|
0.5 |
13.6 |
|
|
min |
|
||
this zone are |
|
min |
|
|
|
|
|
||
uncontrolled |
|
|
|
|
1 |
2 |
3 |
|
|
|
5.5 |
1.15 |
0.5 M |
0.4 |
|
|
|
|
|
|
|
0.95 |
|
1.6 |
|
11 |
|
|
|
Fig.7. SOT93; pin 2 connected to mounting base.
Notes
1.Accessories supplied on request: refer to mounting instructions for SOT93 envelope.
2.Epoxy meets UL94 V0 at 1/8".
October 1994 |
4 |
Rev 1.100 |
Philips Semiconductors |
Product specification |
|
|
Rectifier diodes |
PBYR30100PT series |
schottky barrier |
|
|
|
DEFINITIONS
Data sheet status
Objective specification |
This data sheet contains target or goal specifications for product development. |
|
|
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification |
This data sheet contains final product specifications. |
Limiting values
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
© Philips Electronics N.V. 1994
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale.
October 1994 |
5 |
Rev 1.100 |