Добавил:

student_tipo Опубликованный материал нарушает ваши авторские права? Сообщите нам.

Вуз:

Балаковский институт техники, технологии и управления

Предмет:

[НЕСОРТИРОВАННОЕ]

Файл:

9643

.PDF

Источник:

https://manualmachine.com

Скачиваний:

Добавлен:

06.01.2022

Размер:

62.27 Кб

Скачать

☆

Philips Semiconductors Product specification

Triacs

BT134W series D

logic level

GENERAL DESCRIPTION

QUICK REFERENCE DATA

Glass passivated, sensitive gate triacs

SYMBOL

PARAMETER

MAX.

UNIT

in a plastic envelope suitable for

BT134W-

500D

600D

surface mounting, intended for use in

general

purpose

bidirectional

VDRM

Repetitive peak off-state voltages

500

600

switching

and

phase

control

IT(RMS)

RMS on-state current

applications.

These

devices are

ITSM

Non-repetitive peak on-state current

intended to be interfaced

directly to

microcontrollers,

logic

integrated

circuits and other low power gate

trigger circuits.

PINNING - SOT223

PIN CONFIGURATION

SYMBOL

DESCRIPTION

main terminal 1

main terminal 2

gate

tab

main terminal 2

LIMITING VALUES

Limiting values in accordance with the Absolute Maximum System (IEC 134).

SYMBOL	PARAMETER	CONDITIONS	MIN.		MAX.		UNIT

				-500		-600
V	Repetitive peak off-state		-	5001		6001	V
DRM	voltages
	voltages
		full sine wave; Tsp ≤ 108 ˚C
IT(RMS)	RMS on-state current	full sine wave; Tsp ≤ 108 ˚C	-		1		A
ITSM	Non-repetitive peak	full sine wave; Tj = 125 ˚C prior
	on-state current	to surge; with reapplied VDRM(max)	-		10		A
		t = 20 ms	-		10		A
		t = 16.7 ms	-		11		A
I2t	I2t for fusing	t = 10 ms	-		0.5		A2s
dIT/dt	Repetitive rate of rise of	ITM = 1.5 A; IG = 0.2 A;
	on-state current after	dIG/dt = 0.2 A/μs					A/μs
	triggering	T2+ G+	-		50		A/μs
		T2+ G-	-		50		A/μs
		T2- G-	-		50		A/μs
		T2- G+	-		10		A/μs
IGM	Peak gate current		-		2		A
VGM	Peak gate voltage		-		5		V
PGM	Peak gate power		-		5		W
PG(AV)	Average gate power	over any 20 ms period	-		0.5		W
Tstg	Storage temperature		-40		150		˚C
Tj	Operating junction		-		125		˚C
	temperature

1 Although not recommended, off-state voltages up to 800V may be applied without damage, but the triac may switch to the on-state. The rate of rise of current should not exceed 3 A/μs.

February 1996

Rev 1.100

Philips Semiconductors Product specification

Triacs				BT134W series D
logic level

THERMAL RESISTANCES

SYMBOL	PARAMETER	CONDITIONS	MIN.		TYP.	MAX.	UNIT

Rth j-sp	Thermal resistance	full or half cycle	-		-	15	K/W
	junction to solder point
Rth j-a	Thermal resistance	pcb mounted; minimum footprint	-		156	-	K/W
	junction to ambient	pcb mounted; pad area as in fig:14	-		70	-	K/W
STATIC CHARACTERISTICS
Tj = 25 ˚C unless otherwise stated
SYMBOL	PARAMETER	CONDITIONS	MIN.		TYP.	MAX.	UNIT

IGT	Gate trigger current	VD = 12 V; IT = 0.1 A	-		2.0	5	mA
		T2+ G+	-		2.0	5	mA
		T2+ G-	-		2.5	5	mA
		T2- G-	-		2.5	5	mA
		T2- G+	-		5.0	10	mA
IL	Latching current	VD = 12 V; IGT = 0.1 A	-		1.6	10	mA
		T2+ G+	-		1.6	10	mA
		T2+ G-	-		4.5	15	mA
		T2- G-	-		1.2	10	mA
		T2- G+	-		2.2	15	mA
IH	Holding current	VD = 12 V; IGT = 0.1 A	-		1.2	10	mA
VT	On-state voltage	IT = 2 A	-		1.2	1.5	V
VGT	Gate trigger voltage	VD = 12 V; IT = 0.1 A	-		0.7	1.5	V
		VD = 400 V; IT = 0.1 A; Tj = 125 ˚C	0.25		0.4	-	V
ID	Off-state leakage current	VD = VDRM(max); Tj = 125 ˚C	-		0.1	0.5	mA
DYNAMIC CHARACTERISTICS
Tj = 25 ˚C unless otherwise stated
SYMBOL	PARAMETER	CONDITIONS	MIN.		TYP.	MAX.	UNIT

dVD/dt	Critical rate of change of	VDM = 67% VDRM(max); Tj = 125 ˚C;	-		5	-	V/μs
	off-state voltage	exponential waveform; RGK = 1 kΩ					μs
tgt	Gate controlled turn-on	ITM = 1.5 A; VD = VDRM(max); IG = 0.1 A;	-		2	-	μs
	time	dIG/dt = 5 A/μs

February 1996

Rev 1.100

Philips Semiconductors	Product specification

Triacs	BT134W series D
logic level

1.4	Ptot / W			BT134W		Tsp(max) / C 104
1.4	Ptot / W					Tsp(max) / C 104
1.2								107
							= 180
1			1					110
1							120	110
							120
0.8							90	113
0.8							60	113
							60
0.6							30	116
							30
0.4								119
0.2								122
0	0	0.2	0.4	0.6	0.8	1		125
	0	0.2	0.4	0.6	0.8	1		1.2
				IT(RMS) / A

Fig.1. Maximum on-state dissipation, Ptot, versus rms on-state current, IT(RMS), where α = conduction angle.

1000	ITSM / A		BT134W
				IT	ITSM
				T	time
100				Tj initial = 125 C max
		dIT/dt limit
		T2- G+ quadrant
10
1		100us	1ms	10ms	100ms
10us		100us	1ms	10ms	100ms
			T / s

Fig.2. Maximum permissible non-repetitive peak on-state current ITSM, versus pulse width tp, for sinusoidal currents, tp ≤ 20ms.

12	ITSM / A		BT134W
10			IT	ITSM
10
			T	time
8			Tj initial = 125 C max
6
4
2
0	1	10	100	1000
		Number of cycles at 50Hz

Fig.3. Maximum permissible non-repetitive peak on-state current ITSM, versus number of cycles, for sinusoidal currents, f = 50 Hz.

1.2	IT(RMS) / A		BT134W
1					108 C
1
0.8
0.6
0.4
0.2
0		0	50	100	150
-50		0	50	100	150
			Tsp / C

Fig.4. Maximum permissible rms current IT(RMS) , versus solder point temperature Tsp.

IT(RMS) / A		BT134W
2
1.5
1
0.5
0	0.1	1	10
0.01	0.1	1	10

surge duration / s

Fig.5. Maximum permissible repetitive rms on-state

current IT(RMS), versus surge duration, for sinusoidal currents, f = 50 Hz; Tsp ≤ 108˚C.

	VGT(Tj)		BT136
1.6	VGT(25 C)		BT136
1.4
1.2
1
0.8
0.6
0.4		0	50	100	150
-50		0	50	100	150
			Tj /	C

Fig.6. Normalised gate trigger voltage VGT(Tj)/ VGT(25˚C), versus junction temperature Tj.

February 1996

Rev 1.100

Philips Semiconductors	Product specification

Triacs	BT134W series D
logic level

	IGT(Tj)
3	IGT(25 C)		BT136D	T2+ G+
				T2+ G+
2.5				T2+ G-
2.5				T2- G-
				T2- G-
2				T2- G+
2
1.5
1
0.5
0		0	50	100	150
-50		0	50	100	150
			Tj / C

Fig.7. Normalised gate trigger current IGT(Tj)/ IGT(25˚C), versus junction temperature Tj.

IL(Tj)
IL(25 C)		TRIAC
3
2.5
2
1.5
1
0.5
0	0	50	100	150
-50	0	50	100	150
		Tj / C
Fig.8.	Normalised latching current IL(Tj)/ IL(25˚C),
	versus junction temperature Tj.
IH(Tj)
3 IH(25C)		TRIAC
2.5
2
1.5
1
0.5
0	0	50	100	150
-50	0	50	100	150
		Tj / C

Fig.9. Normalised holding current IH(Tj)/ IH(25˚C), versus junction temperature Tj.

2	IT / A	BT134W
2

Tj = 125 C

Tj = 25 C

1.5

Vo = 1.0 V

Rs = 0.21 Ohms

typ

max

0.5

0 0	0.5	1	1.5	2
		VT / V

Fig.10. Typical and maximum on-state characteristic.

100 Zth j-sp (K/W)			BT134W
10
		unidirectional
1			bidirectional
1
			P	t p
			D
0.1
						t
0.01	0.1ms	1ms	10ms	0.1s	1s	10s
10us	0.1ms	1ms	10ms	0.1s	1s	10s
			tp / s

Fig.11. Transient thermal impedance Zth j-sp, versus pulse width tp.

1000	dVD/dt (V/us)
100
10
1	0	50	100	150
			Tj / C

Fig.12. Typical, critical rate of rise of off-state voltage, dVD/dt versus junction temperature Tj.

February 1996

Rev 1.100

Philips Semiconductors Product specification

Triacs	BT134W series D
logic level

MOUNTING INSTRUCTIONS	PRINTED CIRCUIT BOARD

	Dimensions in mm.	Dimensions in mm.
3.8		36
3.8
min
1.5		18
min		18
min
	60
	4.6	4.5
	9
2.3	6.3
1.5
min	10
	10
(3x)
1.5
min
4.6		7
		15
	50

Fig.13. soldering pattern for surface mounting	Fig.14. PCB for thermal resistance and power rating
SOT223.	for SOT223.
	PCB: FR4 epoxy glass (1.6 mm thick), copper
	laminate (35 μm thick).

February 1996

Rev 1.100

Philips Semiconductors Product specification

Triacs	BT134W series D
logic level

MECHANICAL DATA

Dimensions in mm

Net Mass: 0.11 g

			6.7
			6.3	B
	0.32		3.1	B
	0.32		3.1			0.2	M	A
	0.24		2.9			0.2	M	A
	0.24		2.9
			4	A
	0.10
	0.02			3.7		7.3
				3.3		6.7
16	13
max
	10	1	2	3
	10
	max
1.8	1.05	2.3	0.80	0.1	M	B
max	0.85		0.60	0.1	M	B
max	0.85		0.60	(4x)
			4.6	(4x)
			4.6
	Fig.15. SOT223 surface mounting package.

Notes

1.For further information, refer to surface mounting instructions for SOT223 envelope.

2.Epoxy meets UL94 V0 at 1/8".

February 1996

Rev 1.100

Philips Semiconductors	Product specification

Triacs	BT134W series D
logic level

DEFINITIONS

Data sheet status

Objective specification	This data sheet contains target or goal specifications for product development.

Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.

Product specification

This data sheet contains final product specifications.

Limiting values

Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.

Application information

Where application information is given, it is advisory and does not form part of the specification.

All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.

The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights.

LIFE SUPPORT APPLICATIONS

These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale.

February 1996

Rev 1.100

Соседние файлы в папке THYR&TRI

#
06.01.202215.07 Кб479638.PDF
#
06.01.202215.45 Кб479639.PDF
#
06.01.202252.34 Кб479640.PDF
#
06.01.202251.68 Кб479641.PDF
#
06.01.202251.52 Кб479642.PDF
#
06.01.202262.27 Кб479643.PDF
#
06.01.202262.02 Кб479644.PDF
#
06.01.202252.16 Кб479646.PDF
#
06.01.202251.53 Кб479647.PDF
#
06.01.202251.39 Кб479648.PDF
#
06.01.202256.94 Кб479649.PDF