Philips Semiconductors |
Objective specification |
|
|
Silicon Diffused Power Transistor |
BU2530AL |
|
|
|
|
GENERAL DESCRIPTION
New generation, high-voltage, high-speed switching npn transistor in a plastic envelope intended for use in horizontal deflection circuits of large screen colour television receivers up to 32 kHz.
QUICK REFERENCE DATA
SYMBOL |
PARAMETER |
CONDITIONS |
TYP. |
MAX. |
UNIT |
|
|
|
|
|
|
VCESM |
Collector-emitter voltage peak value |
VBE = 0 |
- |
1500 |
V |
VCEO |
Collector-emitter voltage (open base) |
|
- |
800 |
V |
IC |
Collector current (DC) |
|
- |
16 |
A |
ICM |
Collector current peak value |
Tmb ≤ 25 ˚C |
- |
40 |
A |
Ptot |
Total power dissipation |
- |
125 |
W |
|
VCEsat |
Collector-emitter saturation voltage |
IC = 9.0 A; IB = tbf |
- |
5.0 |
V |
ICsat |
Collector saturation current |
|
9 |
- |
A |
ts |
Storage time |
ICM = 9.0 A; IB(end) = tbf |
- |
4.5 |
μs |
PINNING - SOT430 |
PIN CONFIGURATION |
SYMBOL |
|
PIN |
DESCRIPTION |
|
c |
1 |
base |
|
|
2 |
collector |
|
b |
3 |
emitter |
|
|
|
|
||
heat |
collector |
|
e |
sink |
|
1 2 3 |
|
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum Rating System (IEC 134)
SYMBOL |
PARAMETER |
CONDITIONS |
MIN. |
MAX. |
UNIT |
|
|
|
|
|
|
VCESM |
Collector-emitter voltage peak value |
VBE = 0 V |
- |
1500 |
V |
VCEO |
Collector-emitter voltage (open base) |
|
- |
800 |
V |
IC |
Collector current (DC) |
|
- |
16 |
A |
ICM |
Collector current peak value |
|
- |
40 |
A |
IB |
Base current (DC) |
|
- |
16 |
A |
IBM |
Base current peak value |
|
- |
30 |
A |
-IB(AV) |
Reverse base current |
average over any 20 ms period |
- |
200 |
mA |
-I |
Reverse base current peak value 1 |
|
- |
30 |
A |
BM |
|
Tmb ≤ 25 ˚C |
|
|
|
Ptot |
Total power dissipation |
- |
125 |
W |
|
Tstg |
Storage temperature |
|
-55 |
150 |
˚C |
Tj |
Junction temperature |
|
- |
150 |
˚C |
THERMAL RESISTANCES
SYMBOL |
PARAMETER |
CONDITIONS |
TYP. |
MAX. |
UNIT |
Rth j-mb |
Junction to mounting base |
- |
- |
1.0 |
K/W |
Rth j-a |
Junction to ambient |
in free air |
45 |
- |
K/W |
1 Turn-off current.
December 1995 |
1 |
Rev 1.000 |
Philips Semiconductors |
Objective specification |
|
|
Silicon Diffused Power Transistor |
BU2530AL |
|
|
STATIC CHARACTERISTICS
Tmb = 25 ˚C unless otherwise specified
SYMBOL |
PARAMETER |
CONDITIONS |
MIN. |
TYP. |
MAX. |
UNIT |
I |
Collector cut-off current 2 |
CES |
|
ICES |
|
IEBO |
Emitter cut-off current |
BVEBO |
Base-emitter breakdown voltage |
VCEOsust |
Collector-emitter sustaining voltage |
VCEsat |
Collector-emitter saturation voltage |
V |
Base-emitter saturation voltage 3 |
BEsat |
|
hFE |
DC current gain |
hFE |
|
VBE = 0 V; VCE = VCESMmax |
- |
- |
1.0 |
mA |
VBE = 0 V; VCE = VCESMmax; |
- |
- |
2.0 |
mA |
Tj = 125 ˚C |
|
|
|
|
VEB = 7.5 V; IC = 0 A |
- |
- |
1.0 |
mA |
IB = 1 mA |
7.5 |
14 |
- |
V |
IB = 0 A; IC = 100 mA; |
800 |
- |
- |
V |
L = 25 mH |
|
|
|
|
IC = 9.0 A; IB = tbf |
- |
- |
5.0 |
V |
IC = 9.0 A; IB = tbf |
tbf |
tbf |
tbf |
V |
IC = 1 A; VCE = 5 V |
10 |
- |
30 |
|
IC = 9 A; VCE = 5 V |
tbf |
tbf |
tbf |
|
DYNAMIC CHARACTERISTICS
Tmb = 25 ˚C unless otherwise specified
SYMBOL |
PARAMETER |
CONDITIONS |
TYP. |
MAX. |
UNIT |
|
|
|
|
|
|
|
|
|
Switching times (32 kHz line |
ICM = 9.0 A; LC = 250 μH; Cfb = 13 nF; |
|
|
|
|
ts |
deflection test circuit). |
IB(end) = tbf |
- |
4.5 |
μs |
|
Turn-off storage time |
|
|
||||
tf |
Turn-off fall time |
|
- |
0.35 |
μs |
|
|
|
|
|
|
|
|
2 Measured with half sine-wave voltage (curve tracer).
3 VBEsat limits are targetted at ± 5% of the 50% value of the distribution of measured values.
December 1995 |
2 |
Rev 1.000 |
Philips Semiconductors |
Objective specification |
|
|
Silicon Diffused Power Transistor |
BU2530AL |
|
|
MECHANICAL DATA
Dimensions in mm Net Mass: 9 g
20.5 max |
|
5.3 max |
|
|
|
3.1 |
|
3.0 |
3.5 |
|
|
|
6.0 |
3.0 |
|
|
|
|
|
4.0 |
25.5 |
|
|
26.5 |
10.0 |
|
|
|
3.0 |
|
|
seating |
|
|
plane |
2.5 |
|
|
19.5 |
3.0 max |
|
3.5 max |
||
min |
0.8
1.0
0.4 M |
0.8 max |
|
3.0 max |
5.45 
5.45
Fig.1. SOT430; pin 2 connected to mounting base.
December 1995 |
3 |
Rev 1.000 |
Philips Semiconductors |
Objective specification |
|
|
Silicon Diffused Power Transistor |
BU2530AL |
|
|
DEFINITIONS
Data sheet status
Objective specification |
This data sheet contains target or goal specifications for product development. |
|
|
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification |
This data sheet contains final product specifications. |
Limiting values
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
© Philips Electronics N.V. 1995
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale.
December 1995 |
4 |
Rev 1.000 |