MINISTRY OF EDUCATION AND SCIENCE OF THE REPUBLIC OF KAZAKHSTAN
Almaty Technological University
Sub-department “Technology and design of goods”
Complex of the lectures
on the discipline
Cc saprgpli 3303– sapr Grafis of products of light industry
for the specialty 5B072600 – “Technology and design of light industry products”
Total 4 credits
Course 3
Semester 6
Lectures 30 hours
Practical 30 hours
Total auditorium hours 60
IWSL 30 hours
IWS 90 hours
Total SIS 120 hours
Total expenditure of time 180 hours
Number of midterm controls 2
Examination 6 semester
Performed by: senior lecturer
А.О. Rustemova
Almaty 2016
CONTENT
Lecture 1 Basic rules for work with Grafis
Lecture 2 Grading. Screen work.
Lecture 3 Create and alter perimeter.
Lecture 4 Easy line functions.
Lecture 5 Point, line and direction construction.
Lecture 6 Measurements and annotation.
Lecture 7 Interactive constructions. Pattern output.
Lecture 8 Darts and pleats.
Lecture 9 Curve construction and manipulation.
Lecture 10 Transformation.
Lecture 11 The construction parameter x value.
Lecture 12 The construction parameters g and z values.
Lecture 13 Interactive constructions.
Lecture 14 Part organization.
Lecture 15 Pattern making software for the fashion industry
Lecture 1
Basic rules for working with Grafis
1.1Important rules for work with Grafis
1.2 Starting Grafis
1.3 Calling basic blocks
1.4 Quit
1.5 Work with measurement charts
1.1 Important rules for work with Grafis
Grafis measurements
Grafis works with the following measurements:
Please note, that all length and distance values are diasplayed and entered in millimeters.
Further important rules
Tne decimal symbol is thepoint (.).
e.g.: 10.4, 45.2°, 67,9%, 12,7cm2
Text and value entries are to be completed with <ENTER>.
To abort a text or value entry press <ESC>.
The data base is organized in Grafis as follows:
drivers |
according to hard and software A:,…Z: |
collections |
saved as directories |
styles
|
saved as files |
parts
|
max. 500 parts per style
|
objects |
points, lines, texts, hatching, construction record, construction parameter etc. |
Function key assignment
Function keys F1, ... ,F12 The function keys F1 to F12 are assigned special functions in Grafis. Here, an overview of the functions with reference to the chapter where they are explained in more detail:
F1 |
call on-line help and information |
F2 |
zoom screen content in / out |
F3 |
move / rotate / flip parts |
F4 |
refresh screen |
F5 |
part positioning |
F6 |
centre screen content |
F7 |
Show / hide measurements |
F8 |
Toggle between pieces in their original position, and their position after dragging with <F3> |
F11 |
calculator function for calculation of z values |
F12 |
Display of called interactive constructions in the style |