3.6. Программирование

_{∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙}

3.6.7. Программирование дискового Ввода / Вывода (3 1/2”)

User can copy a single program or all EPI program in the CNC system to the 1.44M disk (31/2"). And vice versa. User can copy a single program or all EPI program from the disk to the CNC system. From system to disk or from disk to the system, that is dependent on where the yellow light bar stayed at the where. So must care to move the light bar in the CNC system(left screen) or disk(right screen). 1.To copy a single program Insert one disk to the floppy disk driver.
	нажмите [EPI] (экранная клавиша) нажмите [DISK IN OUT] main function The left screen is CNC system and the right screen is DISK system. Move the light bar and select a copy file. [copy SINGLE] Input the program № in the disk, when copy an EPI program (in CNC) to the disk. Or input the program № in the system, when copy an EPI program to the system (CNC).

30607 - 1

3.6. Программирование

_{∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙}

		Wait unt il 10 sec., you can see the result of copying.
2.To copy the all program Insert one disk to the floppy disk driver.
	нажмите [EPI] (экранная клавиша) нажмите [DISK IN OUT] main function. The left screen is CNC system and the right screen is DISK system. НАЖМИТЕ [COPY ALL] subfunction KEY COPY the All program. Copy the all program in the system to the disk or copy the all program in the disk to the system. Wait until 5 min., you can see the result of copying. Cancel the copying activity.

30607 - 2

3.6. Программирование

_{∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙}

3.Erase the program
	нажмите [EPI] (экранная клавиша) нажмите [DISK IN OUT] (клавиша основной функции) The left screen is CNC system and the right screen is DISK SYSTEM. Нажмите[ERASE] key subfunction key To delete a program that light bar located.
The screen show the message ERASE нажмите [ENTER] "нажмите [ENTER] TO ERASE OR [CE] TO CANCEL?" CANCEL нажмите [CE] Note1: If the disk is bad, then may destroy the CNC logical system and ECODE /APACK technology database, please check it. Note2: When change a disk or put the disk after the disk operation system screen, you must move the light bar go back to the right screen and then go to the right once again. So that can read the data file from this new disk. Note3: Don't execute a disk operation in the machining.

30607 – 3