
- •The frequency decreases by increasing Periodic time.
- •9 The intensity of sound is measured by unit ……… .
- •Calculate frequency of savart wheel rotates by 300 cycle/minute when it touches a gear of 120 teeths.
- •2) Calculate the number of cycles in savart wheel produces 500 cycle/sec. If the number of teeths is 25 teethes.
- •1) Calculate the depth of sea when waves are sent with velocity 1490 m/sec and time of reflection is 0.1 sec.
- •1 ) Label the figure.
Oscillatory motion work sheet one
Question one: Complete the following:
1
-
The complete vibration includes ……… displacements, each is
called ………
2- Frequency is measured by unit called ……… and its symbol is ……… 3- Frequency × Periodic time = ……… .
4- The maximum displacement reached by the vibrating body far from its original position is ……… .
5- The vibrational motion is done by the vibrating body at ……… of original position.
- The complete vibration is done when the vibrating body passes ……… in the same direction.
7- A Pendulum makes 30 complete vibrations in 6 seconds, its frequency = ………
8- Kilo Hertz = ……… HZ while Mega Hertz = ……… HZ.
Question two: Write the scientific term:
1- The motion done by the vibrating body at both sides of its original position. …………………………………
2-The maximum displacement reached by the vibrating body far from its original position. ……………………………………..
3- Number of complete vibrations done in one second. ………………
4- The time needed to make one complete vibration. ………………….
5- Measuring unit of frequency equals 1× 109 Hertz.
Question three: Give reasons for:
The frequency decreases by increasing Periodic time.
……………………………………………………………………………………………………………………
2-The vibration motion is a Periodic motion.
……………………………………………………………………………………………………………………
Question four: What is meant by?
1- Number of complete vibrations made by vibrating body in time of 10 seconds is 500. ………………………………………………………………………………………………………………………….
2-The amplitude is 6 cm.
……………………………………………………………………………………………………………………
3-Frequency of tuning fork is 600 complete vibrations / second. …………………………………………………………………………………………………………………
4-The Periodic time of simple pendulum is 0.01 second
…………………………………………………………………………………………………………………..
5- The time of 60 complete vibrations is one minute. …………………………………………………………………………………………………………………………………
Question five: Choose the correct answer:
1 - The maximum displacement reached by the vibrating body away from its original position is ……… (frequency – complete vibration – amplitude – vibrational motion)
2- One amplitude is ……… of complete vibration. (four times – equal one – quarter – half)
3- A musical instrument produces frequency of 256 Hertz, this means that the chord of instrument ……… . (has length of 265 cm – produces waves of 256 cm wave length – produces waves of velocity 256 cm/second – vibrates by 256 complete vibrations in one second)
4- A body makes 480 complete vibrations in one minute, its frequency is ……… (2 – 4 – 6 – 8)
5- If the frequency of vibrating body is 6 Hertz so it makes ……… complete vibrations in one minute. (30 – 60 – 360 – 600)
W
ork
sheet two
The
wave motion
Question one:Complete the following:
1- Waves are classified due to their ability to propagate in space into ……… and ……… .
2- The crest in ……… waves represented by ……… in longitudinal waves.
3- Radio waves are ……… waves which can propagate in space by speed ……… .
4- If the distance between the centre of third compression and center of fifth compression in longitudinal wave is 20 cm, so the wave length is ……… .
5- In transverse waves particles vibrate in ……… direction propagation direction.
6- The longitudinal wave consists of ……… and …….. .
7- Particles vibrate in the longitudinal wave in ……… direction of wave propagation.
8- The wave length of transverse wave equals the distance between ……… or ……… .
9- Radio waves are ……… waves, while the sound is ……… waves.
Question two: Write the scientific term:
1- Transverse waves can propagate in space. ……………………..
2- The maximum displacement of particles upwards …………………….
3- The maximum displacement of particles downwards……………………….
4
-
The distance between two successive crests or troughs……………….
5- A disturbance in the medium where particles vibrate in perpendicular direction of wave propagation. ……………………………..
6- Disturbance in the medium where particles vibrate along the wave propagation direction. ………………………………
7- Places where particles are very close. …………………………..
8- The distance between centers of two successive compressions or rarefactions. ………………………….
Question three: Give reasons for
1- Radio waves are electromagnetic while sound waves are mechanical. ……………………………………………………………………………………………………………………………..
2- Water waves are mechanical transverse waves …………………………………………………………………………………………………………………………….…
3- We see lightning first then hearing thunder. ………………………………………………………………………………………………………………………………
Question four: What is meant by
1- Wave length of longitudinal wave is 25cm. ………………………………………………………………………………………………………………………………
2- Wave length of transverse wave is 2 meters. …………………………………………………………………………………………………………………………….
3- The light velocity is 3 × 108 m/sec.
work sheet three Properties of sound waves
Question One: Complete the following:
1- Sound is produced due to ……… of objects.
2- Sound waves are ……… waves that consist of ……… and ……… .
3- Sound waves transfer as ………, it center is……… .
4
-
Audible sound ranges between ……… and ……… Hz.
5- The distance travelled by sound in one second is ……… .
6- From sound properties is ……… by which we can distinguish between weak and strong sound.
7- Noise is measured by unit called ……… .
8- The intensity of sound is ……… proportional with amplitude.